This X5 reflow profiler has new and improved hardware designed to withstand the roughest and toughest daily handling! The electronic circuitry is designed to tolerate a high level of voltage spikes that occasionally occur in some ovens and wave solder machines.
A TWO YEAR warranty on this reflow profiler provides confidence in the build quality.
The X5 reflow profiler is availalbe in 7, 9, and 12 channel versions using standard type K thermocouple connectors and uses standard AAA or recharageable batteries. Additionally you can power the X5 reflow profiler via the USB cable when connected to a computer. Get better data to precisely identify what is going on with each reflow profile and process in the factory.
The X5 reflow profiling software uses a modern, graphical
interface that quickly and intuitively guides you through the task of
reflow profiling. Manual prediction capability comes standard with the X5, allowing you to manually adjust and improve upon your process or oven setup. The Navigator PowerTM software feature automates process improvements and optimization for you and ships standard with the X5 reflow profiler.
Within seconds, the Navigator Power will identify the single best reflow oven profile.
The X5 reflow profiler also comes standard with SPC charting software that helps reveal changes in the reflow profile over time.
The X5 hardware and software establish a new generation of reflow profiler to improve your production quality, productivity, and documentation.
|Internal Operating Temp:||0C to 85C|
|Sample Rate:||0.1 to 10 per second|
|PC Connection:||USB 2.0 (Std-A/Mini-B)|
|Power Requirements:||(3) AAA batteries or USB cable when connected to a computer|
|Radio Frequency (RF):||433.92MHz|
7, 9, 12-Channel Unit:
|Type K, Standard|
(L x W x H mm)
|Thermal Shields:||See Temperature Tolerance Table below for specifications|
Accuracy bassed on factory calibration.
|Temperature Tolerance Table||(maximum endurance in minutes at specified temperature)|
(Length x Width x Height)
|CoolTouch Stainless Steel Shield, 7CH||302.0 x 75.0 x 23.0||17.5||12.0||9.0||7.7||6.5|
|CoolTouch Stainless Steel Shield, 9CH||312.0 x 90.0 x 23.0||18.1||13.1||10.1||8.4||6.7|
|CoolTouch Stainless Steel Shield, 12CH||323.0 x 113.0 x 23.0||17.7||12.0||8.9||7.4||6.1|
Minimum System Requirements
Dual Core / 1 GHz Processor PC with 2 GB RAM
2 GB available storage
Video 1024 x 768 resolution / 16-bit
1 available USB port (for data download)
1 available USB port (for software key)
Microsoft® Windows® XP, Vista, or 7. (32-bit or 64-bit)
KIC’s powerful Navigator™ software is a system that automatically determines the single best oven recipe for every product. Once the initial profile is run, the Navigator evaluates billions of combinations of conveyor speeds and setpoint temperatures in less than a minute, so operators no longer need to set search parameters.
You give the Navigator your profile specs and the Navigator presents the process set up that will produce a profile centered in the process window, with the lowest Process Window Index™ (PWI). With the Navigator, an operator with limited process knowledge can find the optimal profile every time.
Profiling Reduced to a Single Number
For precise ranking of profile performance, the KIC software uses the Process Window Index (PWI). The PWI measures the profile’s fit to the process window in a mathematical and objective manner by using a single number. This aids in optimizing the process by comparing and ranking alternative profiles in terms of their fit to the available process window. The lower the PWI, the more efficient and stable the process! (See the PWI data sheet for a detailed explanation)
Minimum System Requirements
With the KIC software it is possible to enter the Component Specific Specs and the KIC software will suggest the best settings for your reflow oven, ensuring the sensitive components are not at risk.
Reflow profiling made easy!
The most popular and recommended method of attaching thermocouples to a PCB is by using Thermocouple Attachment Tape.